Production process: The forklift delivers the raw ore into the silo, and a conveyor is placed at the tail of the silo. The raw ore from the tail is uniformly crushed by the vibrating feeder through the conveyor to the jaw crusher directly below.
Then, the crude material produced is transported by the conveyor to the fine crusher for further crushing, and the finely crushed stone is put into the vibrating screen to sieve two stones and stones of different sizes.
The large stones exceeding the specification are returned to the fine crusher and broken again.The material under the sieve enters the rod mill, and the material from the rod mill is classified by a cylindrical sieve, and sieved back to the rod mill.The undersize material enters the blocked settling machine and the hydraulic classifier for classification. The graded product is subjected to iron removal by a high field strength plate magnetic separator and a vertical ring high gradient magnetic separator.The fine sand after the iron removal is dehydrated by the de-slipping bucket and then driven into the fine sand pool.
Introduction of working principle